Netzer Configuration
Logged in as
admin
. Close browser for logout.
SYSTEM STATE
COMMON
USER
GPIO
SERIAL
UART settings
UART Baudrate:
300 Baud
1200 Baud
2400 Baud
9600 Baud
19200 Baud
57600 Baud
115200 Baud
Common SPI settings
Clock mode:
Transmit occurs on transition from high to low, idle state is low
Transmit occurs on transition from low to high, idle state is high
Transmit occurs on transition from low to high, idle state is low
Transmit occurs on transition from high to low, idle state is high
SPI Master settings
Clock frequency:
10.4 MBit/s
2.6 MBit/s
650 KBit/s
Input sampling:
At middle of data output
At end of data output
I2C Master settings (SCL = SPI_CLK, SDA = SPI_MI)
Clock frequency:
400 kHz
100 kHz