Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
en:netzer:startpage [2011/12/19 12:23]
127.0.0.1 external edit
en:netzer:startpage [2014/02/09 14:32] (current)
Line 7: Line 7:
  
 ==== Blink ==== ==== Blink ====
 +
 If there is more than one Netzer in the network, it could be useful to find a single Netzer with the Blink mode. If there is more than one Netzer in the network, it could be useful to find a single Netzer with the Blink mode.
 +
 Both LEDs at the RJ45 socket are toggled in a second interval. Both LEDs at the RJ45 socket are toggled in a second interval.
  
  
 ==== Restart ==== ==== Restart ====
 +
 The Netzer is shut down and restarted afterwards. The bootloader is not activated during this time. The Netzer is shut down and restarted afterwards. The bootloader is not activated during this time.
 +
  
 ==== Reset to factory settings ==== ==== Reset to factory settings ====
 +
 The Netzer is shut down and restarted afterwards. The bootloader is not activated during this time. Right after the restart all settings are reset to [[en:​netzer:​resettofactory|factory settings]]. The Netzer is shut down and restarted afterwards. The bootloader is not activated during this time. Right after the restart all settings are reset to [[en:​netzer:​resettofactory|factory settings]].
 +
  
 ==== Shut down ==== ==== Shut down ====
-The Netzer is shutdown and enters power down resp. sleep mode. Also in this mode Netzer consumes power, but not as much like in normal mode. An impulse at the reset pin wakes Netzer up. 
- 
- 
  
 +The Netzer is shutdown and enters power down resp. sleep mode. Also in this mode Netzer consumes power, but not as much like in normal mode. An impulse at the reset pin wakes Netzer up.
  
  

QR Code
QR Code Startpage Webinterface (generated for current page)